Introduction:
The PE4H V3.2 is designed for Notebook PCs that converts PCI Express 16X add-on Card to ExpressCard or mPCIe connecter or PCI Express slot.
Enclosure can support 12 inch(30cm) full length size and 2 PCIe slot depth, so large graphic card can be installed.
Heat dissipation is deeply considered. Material of enclosure is whole aluminum and has two large fans for top and bottom and also three fans for rear panel. Also, spin speed of fans can be adjusted on-board rheostat.
Can option 120W AC adapter. Besides, as ATX power supply can be directly connected from ATX 24pin connector, powerful graphic card can be supported.

This adapter allows you to use your existing PCI-E 16X Card in the notebook PC or Desktop PC for test.

PE4H-EC060A V3.2
			PE4H-EC060A module V3.2	PE4H-EC060A module V3.2
※ PCI-E interface card Allowed maximum dimensions:

 

OPTION
PE4H Box V3.2	120W 19.5V AC Adapter (Input:110-240V ~ 2.0A 50-60Hz  Output 19.5V 6.15A)
120W 19.5V AC Adapter (Input:110-240V ~ 2.0A 50-60Hz  Output 19.5V 6.15A)

Specification

• PE4H-EC060A V3.2 allows user to test PCI Express x16 Add-in-Card on the ExpressCard slot
• PE4H-PMxxxA V3.2 allows user to test PCI Express x16 Add-in-Card on the PCI Express mini card (mPCIe) slot.
• PE4H-HPxxxA V3.2 allows user to test PCI Express x16 Add-in-Card to be extend from PCIex1 (or x4, x8, x16) slot.
• Compliant with PCI Express 2.0 Specification: Maximum 5Gbps
• Compliant with USB2.0 Specification: Maximum 480Mbps
• Power Supply: AC Adapter 120W @ 19.5V.  Optional: ATX PSU, directly connect to 24pin connector.
• Enclosure: Whole Aluminum Body, 2 large fans on top and bottom panel, 3 fans for rear panel.
  Supported PCIe Card Size: 12inch(30cm) , 2 PCIe slot depth

System Requirements

• Notebook PC or Desktop PC with an available ExpressCard slot or PCI Express mini card slot or PCI Express slot.
• Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) SP2 or later/ XP (32-/64-bit) SP3 or later

Notice:

1. PE4H V3.2 is PCIe 1-Lane 5.0Gbps bandwidth limit passive adapter in compliance with Expresscard 2.0 specification
2. PE4H V3.2 design for engineering test. NOT for home or office use.
3. Basically, PCIe add-on card designed for desktop. We can’t guarantee it compatibility with your laptop. Depends on OS version, notebook’s BIOS, device driver,
4. Almost PCIe 16x video card can’t get enough memory resource are allocated. Can’t work in your laptop.
5. External Power (ATX Power or AC-DC12V adapter) required.
6. All of interoperability is not guaranteed.
7. For more graphics cards experiences. Please visit web-site here.

 

Item / 項 目	PE4L ver1.5	PE4L ver2.1	PE4H ver2.4	PE4H ver3.2
USB interface USB介面 USB インターフェース	USB2.0	USB2.0	USB2.0	USB2.0
PCIe interface PCIe介面 PCI Expressインターフェース	1x,2x,4x,8x,16x	1x,2x,4x,8x,16x	1x,2x,4x,8x,16x	16x
PCIe Spec/Speed PCIe規格/速度 PCIe規格・速度	Gen1/2.5Gbps	Gen2/5Gbps	Gen1/2.5Gbps	Gen2/5Gbps
3.3V power switch protect your host 3.3V的電源開關，保護你的主機 3.3V電源保護(ホストへの逆流防止)	Yes 有 有り	Yes 有 有り	Yes 有 有り	Yes 有 有り
12V power fuse Trip current (Itrip) 12V電源保險絲跳閘電流 12V 電源切断電流値(Itrip)	No 不支持 非対応	10A	10A	10A
Custom PCIe external cable support 自定義外部的PCIe電纜支援 専用PCIe外部電源ケーブル(最大値)	30cm, 100cm	60cm	30cm, 100cm	60cm
Power LED 電源LED	3V LED 3.3V電源LED	3V LED 3.3V電源LED	PERST#,12V,5V,3V PERST#用LED 電源LED (12V,5V,3.3V)	PERST# ,3V PERST#用LED 電源LED (3.3V)
5V USB power from expresscard 來自ExpressCard 的5V USB電源 USBバスパワー (5V)	DC Jack or PSU DC插口或軟碟電源連接器 DCジャックor フロッピー 電源コネクタ	DC Jack or PSU DC插口或軟碟電源連接器 DCジャックor フロッピー 電源コネクタ	DC Jack or PSU DC插口或軟碟電源連接器 DCジャックor フロッピー 電源コネクタ	DC Jack or ATX 24pin connector DC插口或ATX連接器 DCジャックor ATX 電源コネクタ
12V power from external DC jack 外部直流12V電源輸入插孔 DCジャック外部電源入力 (内部12V電源)	DC12V	DC12V	DC15~20V	DC15~20V
12V power from PSU (floppy power) 軟碟12V電源連接器輸入功率 ロッピー電源コネクタによる12V 電源入力	Yes 有 有り	Yes 有 有り	Yes 有 有り	No 不支持 非対応
DC 19V to 12V 直流19V至12V 19V入力-12V変換	No 不支持 非対応	No 不支持 非対応	12V/3A	19V/3A
12V to 5V 12V輸入5V的轉換 12V入力5V変換	No 不支持 非対応	No 不支持 非対応	5V/1.5A	5V/1.5A
5V to 3.3V 5V輸入3.3V的轉換 5V入力-3.3V変換	3.3V/3A	3.3V/3A	3.3V/3A	3.3V/3A
PERST# delay switch 延時開關 PERST# 遅延変換スイッチ	0秒, 7秒	0秒, 0.5秒, 7秒	0秒, 7秒, 15秒	0秒, 9.8秒, 15秒
PCBA Dimension 外型尺寸 本体外形寸法	64.05x46.55mm	64.05x46.55mm	185.25x36mm	139.60x150.00mm

Documents Download
PE4H V3.2 Brief	Taiwan	Taiwan 2 Mirror	China Mirror
Comparison List	Taiwan	Taiwan 2 Mirror	China Mirror
User manual	Taiwan	Taiwan 2 Mirror	China Mirror